Emulating the PSX...

[Kameo]

To emulate the PSX I'm using ePSXe1.5.2 as ePSXe1.6.0 is having more bugs than version 1.5.2, strangely enough. I suggest U use it as well, if U R having trouble locating ePSXe1.5.2, the BIOS-files or the plug-ins don't hesitate to ask me about it and I will get them to U. To keep it easy while I'm creating this thread I will assume U already have all of that.

I am aware of the fact that some of the plug-ins I'm using R a little outdated, U don't have to point me to this, I already know. U can get the latest plug-ins from here http://ngemu.com/psx .

The reason why I'm using these plug-ins is because not everyone has a high end system, I myself have a AMD Duron 1600MHz, 512MB RAM and a 64MB GFX card and for me it works fine like this, anyone with a PC similar to mine can do this with out problems. If U have a better PC U might get a improved performance but there won't be much differences noticable.

Having said all of that, let's emulate the PSX.

----------------------------------------------------------------------------------------

Extract ePSXe, the BIOS and the plug-ins.

Copy or move the BIOS-files (all of them) into the BIOS-folder in the ePSXe-folder.

Copy or move the plug-ins (all of them) into the plug-in folder in the ePSXe folder.

-------------------------------------------------------------------------------------------------------

Now we R ready to set up ePSXe's configuration.

It's easier to look at my screenies and follow from there I guess.

-------------------------------------------------------------------------------------------------------

Start up ePSXe and select "config", go to "BIOS", it should automatically open the BIOS-folder inside the ePSXe-folder, if not, set the path. Select the BIOS called "SCPH1001" and click "OK".

The SCPH1001 BIOS works with European, USA and Japanese ISOz, anyone who's trying to tell U it doesn't work like that obviously never tried it, trust me, it will work.
http://i6.photobucket.com/albums/y210/R4YNE/PSX%20Emulation/PSX010101BIOS.jpg

Close ePSXe so it saves the BIOS configuration.

-------------------------------------------------------------------------------------------------------

Time to add a little sound.

Start up ePSXe again, go to "config", select "sound", it should automatically open the plug-in folder inside the ePSXe folder, if not, set up the path. Select the Eternal SPU Plugin 1.41 plug-in, check "Enable XA sound" (this is to make sure U have sound in the FMV's), no further configuration needed, click "OK".

http://i6.photobucket.com/albums/y210/R4YNE/PSX%20Emulation/PSX02Sound.jpg

Close ePSXe so it saves the sound configuration.

-------------------------------------------------------------------------------------------------------

Time for some nice graphics now, there's 3 kinds of Games on the PSX, 2D Games, 3D Games and 2D/3D Hybrid Games. We will start off with the 3D Games, this configuration will also work with the 2D/3D Hybrid Games.

-------------------------------------------------------------------------------------------------------

Start up ePSXe, go to "Config", select "Video", it should automatically open the plug-in folder inside the ePSXe folder, if not, set the path. Select Pete's OpenGL Driver 1.75 and click "configure". This plug-in will give U nice and smooth graphics.

Now set it up like it is shown in the following picture, U do not have to check the "Show FPS display on startup", I'm using it to see if my FPS R alright, check it if U R interested in such a thing, if not, don't check.

If Ur desktop resolution isn't 800x600 U select another one, this should be obvious.

http://i6.photobucket.com/albums/y210/R4YNE/PSX%20Emulation/PSX03OpenGL.jpg

Select "OK" and close ePSXe so it saves the video configuration.

-------------------------------------------------------------------------------------------------------

Start ePSXe again, go to "Options", select "Country" and choose "Autoselect", this way ePSXe automatically detects the region the ISO is for (I believe it does this anyway but let's be sure), U don't have to close ePSXe now in order to make it save this.

-------------------------------------------------------------------------------------------------------

Now we've got a BIOS, sound, video, what R we missing here?? Ofcourse, controls.

Go to "Config", select "Game pad" and choose "Pad 1" (set up the 2nd controller as well if U want to play a 2Player Game).

Now configure Ur controls in a way U see fit, don't bother with setting up the two Analog sticks, U really don't have to, set it up according to the following screenie.

http://i6.photobucket.com/albums/y210/R4YNE/PSX%20Emulation/PSX04Control.jpg

Click "oke" once U R done, U don't have to close ePSXe in order to make it save Ur control configuration.
-------------------------------------------------------------------------------------------------------

All set, time to play a 3D Game, I assume U already have this.

-------------------------------------------------------------------------------------------------------

Start up ePSXe again, go to "File", select "Run ISO", go to the folder the ISO of the Game U want to play is in, ePSXe can only read .BIN. ISO or .IMG files, any others will not work because they won't be detected.

Don't bother with the .CUE files, U only need them if U want to burn them to CD to play them on a real PSX.

http://i6.photobucket.com/albums/y210/R4YNE/PSX%20Emulation/PSX05Open3DGame.jpg

Wait for ePSXe to load the Game, this won't take long but during the load up it might make Ur screen look a little weird. Nothing to worry about, just wait until it's loaded and...

http://i6.photobucket.com/albums/y210/R4YNE/PSX%20Emulation/PSX06Play3DGame.jpg

http://i6.photobucket.com/albums/y210/R4YNE/PSX%20Emulation/PSX07Play3DGame02.jpg

Voila, U now run a 3D or a 2D/3D Hybrid PSX Game on Ur PC.

-------------------------------------------------------------------------------------------------------

Now to run a 2D PSX Game on Ur PC.

Start up ePSXe, go to "Config", select "Video" and choose the P.E.Op.S. Soft Driver 1.17 plug-in, configure it according to the following screenie.

If Ur desktop resolution isn't 800x600 U select another one, this should be obvious.

http://i6.photobucket.com/albums/y210/R4YNE/PSX%20Emulation/PSX08PEOpS.jpg

Click "oke" and close ePSXe so it saves Ur video configuration.

-------------------------------------------------------------------------------------------------------

Time to run a 2D PSX Game, I assume U already have this.

-------------------------------------------------------------------------------------------------------

Start up ePSXe again, go to "File", select "Run ISO", go to the folder the ISO of the Game U want to play is in.

http://i6.photobucket.com/albums/y210/R4YNE/PSX%20Emulation/PSX09Open2DGame.jpg

Wait for the Game to load and...

http://i6.photobucket.com/albums/y210/R4YNE/PSX%20Emulation/PSX010Play2DGame.jpg

http://i6.photobucket.com/albums/y210/R4YNE/PSX%20Emulation/PSX011Play2DGame02.jpg

Voila, U now run a 2D PSX Game on Ur PC.

--------------------------------------------------------------------------------------------------------

That's all, remember to change the two video plug-ins when U want to play 2D or 3D Games, enjoy :)...

[Mjshl2]

Very nice, Awesome walkthrough. Although ill add that certain games will require you to have different plugins so I suggest getting them all.

[savking]

Thanks a lot iv bin tryin to set up this praricular emu 4 a while now and this has helped me get it running:D :D :D :D :cool:

[Kameo]

@ Mjshl2 I have about 250 PSX ISOz and I have yet one to find that doesn't work with any of those two set ups ;).

And yea, the Admin. already knows about this thread, he's awaiting it so it's just a matter of time before he comes online to sticky it...

@ savking, no problem, that's what I wrote it for, I'm glad to hear it was of good use for U :)...

[Mjshl2]

I have to use next3d 1.5 for the game Team buddies none of the others will run it except for the next gl plugin but that runs it wierd. Also for guilty gear it wont run right on anything but the Petes Open gl2 driver 2.8.

[savking]

yh u no when u try to run team buddies does it just get to the end of the first loadin bar then freeze
????:confused:

[Yatsuna]

I can't help but notice you background. All the colors look cool. that is a nice wallpaper.:) lol

[TecraMan82]

Yes I agree, very well done walkthrought Kameo!
But here I am, with a new desktop, a PSX controller, and chrono cross 2 discs (bin and cue) wondering what to do with them, I have 2 PSX emulators, one is Bleem! and the other might be ePSXe but I am not sure. and do not want to use Bleem! because it is not a full version only it with a crack file and I dont know if there is a better program that will run appropratly I could use some help, I plan on backing chrono cross up to disc, so. Once I have desktop set up....what program is best to play PSX discs and backup files?

[Mjshl2]

Bleem is lame use epsx

[TecraMan82]

Mjshl2 Wrote:I have to use next3d 1.5 for the game Team buddies none of the others will run it except for the next gl plugin but that runs it wierd. Also for guilty gear it wont run right on anything but the Petes Open gl2 driver 2.8.
================================================== ========

go here
http://www.megagames.com/psx/psx_patches_t.shtml

I found this list of websites and found a patch or maybe somehelpful links for that game that you are having trouble w/.

[Iceman]

Very nice walkthrough Kameo, Thumbs up!:D

[TecraMan82]

Wow that is a great conver I will test it once I have my new P4 this week it comes i think. I will be able to use it as long as my old 512mbRAM works inside the new one, If it does, and i think it will, Ill have P4 2.53hmz with 256mbRAM, if the old ram works, ill have close to 900mb RAM and that should run ePSXe under windows XP until I get a video card.

[TecraMan82]

Kameo how does this emulator play most ISOs, specifically Chrono Cross if at all? Will I need a plug in to make it work? and is chrono cross a hybrid game?

BTW I must have been on glue when I typed that messgae above I mean walkthrough, I am having one of those weeks. -_-''

[Remorse]

If EPSXE doesn't work for you, there's another great PSX emu: Its called pSX. Its a new emulator, but already plays most games without problems. Its easy to use and doesn't requires a great computer.

Here's a step-by-step how-to-use:

1. Get the emulator here:
http://psxemulator.gazaxian.com/pSX_1_4.rar

2. You'll need the d3dx9_26.dll file. Get it here:
http://www.dll-files.com/dllindex/dll-files.shtml?d3dx9_26
(Click on "Click here to go to the download of d3dx9_26.dll")

3. Download the PSX bios somewhere. AND JUST LIKE KAMEO SAID, THE SCPH1001.BIN WORKS FOR ANY GAME, NOT JUST US GAMES!

4. Extract the emulator and then extract the .dll file on THE SAME PLACE as the emulator. Then extrack the bios file on the BIOS folder.

5. Open the emulator. You'll see the Bios logo. Go to "FILE", then "CONFIGURATION".

6. Go to the "GRAPHICS" menu and DISABLE "frame skipping".

7. Go to the "MEMORY CARDS" menu and click on the "..." button on the right side of the slot 1 line. Then just type the name you want on the file name command line.

8. Then go to the "CONTROLLERS" menu to set up the controllers.

9. Now just click OK.

10. To start a game from a CD, just go to the "FILE" menu and select "INSERT CD DRIVE" and select your CD drive. Look the pic: my CD drive is F:
http://i14.photobucket.com/albums/a348/Brasilidade/pSX.gif

11. Wait for the game to load, and have fun. Oh, and to make the game run at FULL SCREEN, press ALT + ENTER.
http://i14.photobucket.com/albums/a348/Brasilidade/pSX2.gif


BTW, you can FAST FORWARD the game by holding down the BACKSPACE key. :)

[TecraMan82]

Awsome great I just have one question about the PSX emulator and ePSXe too, I keep getting missing WNASPI32.dll file errors, I think Im missing and the error pops up after Config>Video menu
can anyone tell me where to get these files
Also pSX says when I open it that it cannot load 3D3 and then asks me to save a minidump file somewhere so befor I had no dll file and it would open now it won't even stay open now that I have the file, is it my emeory? I only have 256MB

[pspman]

Good work!;)

thanks...

[TecraMan82]

Thanks for all the help I got both pSX and ePSXe working! Now I have the slight problem finding roms for this emulator. I wont ask but do not hesitate to share!

[Enriouki Naomi]

Okay... I've tried the emulator that Remorse recomended, but I keep getting an error.
---------
bOrken
Unhandled exception. Save a crash dump?
---------
That's the error.
If I click no, then the program crashes.
If I click yes, then it askes me to save a full dump.

Clicking yes makes it start saving, then the program doesn't respond.
If I click no, I have to pick a save location, it saves, then closes.

Why am I having this crappy luck with emulators?

[Kameo]

I'm not sure, do U have a PSX BIOS??

[Enriouki Naomi]

Ins't that the scph1001.bin thing?

[Kameo]

Yes :). U need one in order to make it work, I can send U one if U need it :)...

[Enriouki Naomi]

I have one.

[Kameo]

It should work then.

What kind of PC do U have?? System specs. I mean...

[Enriouki Naomi]

Wheee.... let's see...

Intel Pentium 4 CPU 3.00GHz
1022 Meg of RAM
Graphics Card is Radeon X300 Series
Sound Card is Sound Blaster Live! 24-bit

Anything I missed?

[Kameo]

U can easily run the PSX with that, R U sure U followed our steps?? And R U still trying to run original CD's?? Go for ISO's, that's a lot easier, and faster ;)...

[Enriouki Naomi]

No... I can't even get it to run.
Did you see the error that I said it gives me?
It's in one of my earlier posts.

[TecraMan82]

I had the exact same probelm Enriouki Naomi when setting up ePSXe on my new computer, I adjusted some files added some dlls and added to my vurtual memory capacity and the program runs great on my computer now. Sounds difficult but if you read one of my previous posts in this thread to find the dll that the graphics driver requires to run properly in windows it should be a quik fix. Try adding it to a couple dir's, like your epsxe dir, and any other dirs that you think it may look for it while dunning a graphics driver check prior to running the program itself.
As for the VRAM, you may not need to change that, I did becuase my computer only came with a measly 256MB but runs at 400Mhz and is PC3200 (which is about the fastest type of DDR RAM on the market) so I added triple the VRAM, and increased the minimum of system useage of RAM from the amount on the one channle (256MB) basically added 128MB to make the SPU think that it has another 128MB and a maximum total of 700+ MB that way I can download from coolroms browse online and also run emulators without graphics problems.
Although now that I'm running it my sound is still very very choppy, but that hasnt stoped me from backing up 50+ discs recently but sound on one game, The Missadventures of Tron Bonne, still is problematic. Everytime I start it I try a new setup to get it to run properly, the text has audio sync to progress through the game it has to stay in sync and if there is one block of audio that is missed in any way I can only progress to a curtain point in the first level and then I get a black screen of death which forces me to retstart, its like I said a problem, I decided to move on to a working game for right now and deal with it once I add more ram and a gfx card.
Other than that my new compuetr works great, I played around with it and I got my laptop networked to it as weel as out main hub computer where I get internet access from, and hooked up a shared printer I was givin as a gift and also got a fax machine working with my software modem! I have added 2 40GB external HD's and can run NES SNES Genesis and even Nintendo 64 Emulators directly off either =) woohoo networking is fun!..

My new computer set up looks like this
Compaq 2.53Mhz
40GB Master HD w/ 2 2.5" 40GB external HDs
2 DVD drives one CD-R/DVD combo
Floppy Drive
100MBS internet connection shared over 4 computers (2 desktops 2 laptops)
256MB pc3200 RAM
in the past week I have downloaded almost 30 gigabytes and transfered over 45GBs

works in progress

[Enriouki Naomi]

I can't run either emulator (ePSXe or pSX).
They crap out before I can do anything...

[Enriouki Naomi]

Sorry for a double post... but will ANYONE help me?

[pizzaman]

Sorry for a double post... but will ANYONE help me?
What happens? Mine didn't work once because I set the screen in 800x600 instead of 1024x748. Does a black screen pop up?

[Enriouki Naomi]

Sorta.
For the ePSXe, it'll start up as if it were going to play, then just closes.
For the pSX emulator, I can't start it up without getting an error.

[pizzaman]

Sorta.
For the ePSXe, it'll start up as if it were going to play, then just closes.
For the pSX emulator, I can't start it up without getting an error.
Lol, the ePSXe is a PSX emulator.

[Remorse]

Lol, the ePSXe is a PSX emulator.


When he said pSX emulator, have you noticed the small "p" and the capitalized "SX"??

"pSX emulator" is the name of another PSX emulator. Its a nice emu, but with a stupid name! ;)

And "Enriouki Naomi", what kind of error message does pSX gives?

[pizzaman]

When he said pSX emulator, have you noticed the small "p" and the capitalized "SX"??

"pSX emulator" is the name of another PSX emulator. Its a nice emu, but with a stupid name! ;)

And "Enriouki Naomi", what kind of error message does pSX gives?
Oh sorry... heh :o

[Enriouki Naomi]

Okay... I've tried the emulator that Remorse recomended, but I keep getting an error.
---------
bOrken
Unhandled exception. Save a crash dump?
---------
That's the error.
If I click no, then the program crashes.
If I click yes, then it askes me to save a full dump.

Clicking yes makes it start saving, then the program doesn't respond.
If I click no, I have to pick a save location, it saves, then closes.

Why am I having this crappy luck with emulators?
That's what I'm getting with the pSX

[redspades]

when i try to run a game on epsxe i have 'missing render-texture extension!' and 'No pixel format available!' come up and then it crashes.
can someone help me.

[redspades]

when i try to run a game on epsxe i have 'missing render-texture extension!' and 'No pixel format available!' come up and then it crashes.
can someone help me.

[pizzaman]

You double posted. :nono:
Oh well, how much RAM does your computer have?

[redspades]

yeah sorry about the double post, my computer stuffed up.
i have 256

[pizzaman]

yeah sorry about the double post, my computer stuffed up.
i have 256
That might be the problem. Try using another graphics plugin and see what happens.

[Fierce Deity]

Kameo, I must ask, what is it that you have set as you desktop background?

[harger]

How do u get Video? When i select configure Video it has nothing in the blank is that post to happen? what video do i get or download?

[harger]

On my Video Plugins it says not video Plugins found whats wrong with this video?

[Basher_101]

if your using the recomended ones they should work...

i have the plugins Pete's OpenGL2 Driver 2.7, Pete's OpenGL Driver 1.41, and Pete's D3D Driver 1.41

...hope that helps :)

i'm also using the emulator ePSXe 1.6.0

[harger]

is that better version or something?

[Basher_101]

To emulate the PSX I'm using ePSXe1.5.2 as ePSXe1.6.0 is having more bugs than version 1.5.2, strangely enough. I suggest U use it as well, if U R having trouble locating ePSXe1.5.2, the BIOS-files or the plug-ins don't hesitate to ask me about it and I will get them to U.

thats what he said, if you ask me, i'm not sure which one is better or easier cause this is the only one i have/used

[harger]

Where do i get eSPXe 1.6.0?

[Orion the Hunter]

where did you get the castlevania rom i cant find one anywhere:mad2:

[harger]

who? me? i got it from Rom Hustler

[Fierce Deity]

who? me? i got it from Rom Hustler
I thought you couldn't advertise other places to get ROMs? Or is it only if they have ESAs?

[Basher_101]

Where do i get eSPXe 1.6.0?

if i remember correctly, i googled it...

where did you get the castlevania rom i cant find one anywhere

they have it at coolrom.com, have you ever heard of it...?

and it's for the n64/pj64 if you didn't know that...

I thought you couldn't advertise other places to get ROMs? Or is it only if they have ESAs?

not sure myself...maybe, don't ban him :(

[bigbluechicken]

Hey im new at this, but everytime i try to play my game, it gives me this error
"ePSXe is NOT completely configurated go to config->bios to configure it"

i don't know if i mewssed up somewhere but it never works...

[Kameo]

and it's for the n64/pj64 if you didn't know that...


This is nonsense, Nocturne in the Moonlight never was released on the N64. It only got a Saturn and PSX release. It's clearly showing an image of running Symphony of the Night (western name for Nocturne in the Moonlight) on a PSX emulator, how is this Game for the N64 then??

[Kameo]

Hey im new at this, but everytime i try to play my game, it gives me this error
"ePSXe is NOT completely configurated go to config->bios to configure it"

i don't know if i mewssed up somewhere but it never works...

Go to page one of this thread and follow the walkthrough, I can't make it easier for U than that, read it...

[Basher_101]

This is nonsense, Nocturne in the Moonlight never was released on the N64. It only got a Saturn and PSX release. It's clearly showing an image of running Symphony of the Night (western name for Nocturne in the Moonlight) on a PSX emulator, how is this Game for the N64 then??

oops...^_^; i'm such a dummy...

speaking of dummy, let's say i don't have the game BUT i do have a rar file... what do i do now?

EDIT: Or how do i change it?

[harger]

everytime i try to play a game it says on ePSXe 1.5.2,ePSXe is not completely configured go to config>video to configure it. I don't have any In the video though thereis nothing in my video and i don't know how to install it there in the video.Whats wrong with my emulator?

[Iconoclast]

everytime i try to play a game it says on ePSXe 1.5.2,ePSXe is not completely configured go to config>video to configure it. I don't have any In the video though thereis nothing in my video and i don't know how to install it there in the video.Whats wrong with my emulator?I only have N64 experience, but I did burn a CD with one emulator from each console on it. The one I did was ePSXe. I remember needing to get a BIOS file, which I downloaded (really hard stuff to search for), and I somehow--can't remember--downloaded plugins. Oh, from NGEmu.com. You just need some emulation plugins like in Projedct64, and you're all set. But you'll need PSX plugins, which should be available at NGEmu.com.

[harger]

Never mind i got it to work now.All i need is Grandia Disc 1 and 2 now. i still can't find it the other ones i downloaded won't work

[duckies]

Kameo, thanks for the walkthrough but I'm a complete newbie on this kinda stuff.

So I need the scph1001.bin file, do you know where I can get this and I need plugins from ngemu.com but which ones do I need?

Just to tell you I have:
-Intel Celeron CPU 2.6GHz 2589MHz
-Ram Size: 767.48 MB
-Windows XP Home Edition Service Pack 2
-Graphics: Nvidia GeForce FX 5600 256MB

What plugins will I need with that ^^^ system?

Thanks for your time

duckies :)

[Shadow Torrent]

Kameo, thanks for the walkthrough but I'm a complete newbie on this kinda stuff.

So I need the scph1001.bin file, do you know where I can get this and I need plugins from ngemu.com but which ones do I need?

Just to tell you I have:
-Intel Celeron CPU 2.6GHz 2589MHz
-Ram Size: 767.48 MB
-Windows XP Home Edition Service Pack 2
-Graphics: Nvidia GeForce FX 5600 256MB

What plugins will I need with that ^^^ system?

Thanks for your time

duckies :)
Search on google, i found the bios on my first search.

[duckies]

Search on google, i found the bios on my first search.
Thanks, I got the BIOS :) Where did you get your plugins, I'm not sure which ones I should get?

[G0ldenEye]

yo thx that really helped me! i was so confused:confused:

[G0ldenEye]

yo thx that really helped me! i was so confused!:confused:

[Sataki]

oops...^_^; i'm such a dummy...

speaking of dummy, let's say i don't have the game BUT i do have a rar file... what do i do now?

EDIT: Or how do i change it?
I believe you need a program called Winrar to open it.

[Sataki]

Kameo, I must ask, what is it that you have set as you desktop background?
It looks like a pic from legend of mana(you can tell by the rabites jumping at the bottom of the screen).

[Sataki]

I can't get Chrono Cross to work on ePSXe. I tried your settings and then i tried changing it so it would be a little faster, but either way it goes extremely slowly. I had it show the FPS and somtimes it will be as low as 7.0 and other times it will be as high as 800.0, and either way it runs slowly.

[Sataki]

Sorry for posting 4 times in a row, but i figured out the problem. I just changed the desktop resolution and now it works fine.:)

[harger]

how come my ESPXE 1.5.2 is not working? i tried the same Grandia Kamoe that you have and when i load ISO it won't show FPS and the Screen is still black. i think i may not have what ya have for some resone.

[Kameo]

That's because U R trying to run a Torrentfile, not the ISO :p...

[DXgeneration8]

my screen stays blank when i try to run it... ill wait like 15 minutes and i still get nothing. the only thing that works is when i click "run BIOS" that works, other than that i cant get an ISO to run.

[DXgeneration8]

yeah how long does it usually take to load? its takin me forever.

[Kameo]

Have U actually extracted the ISOz??

[DXgeneration8]

wait, extract? now i feel stupid...

[DXgeneration8]

i just go to "run ISO" and then wait.

[DXgeneration8]

i figured id try 1.60, and it works now. its the only way i can get anything to show.

[harger]

heres what my Emulator for ESPXE1.5.2 does i think it may not appear forgive me if it does not

[harger]

trying to get used to the pictures again

[harger]

i forgot how to put the pictures on here can anyone tell me how to do that? when you take pictures from ESPXE1.5.2.i did that and i donno how to load it on here. i can't remember on how to do it ever since i lost my Internet.i'm trying to show what my Image looks like when it stays black

[pizzaman]

Kameo, is the ePSXe the best emulator for this? I mean the latest release was in 2003....

[Kameo]

So far this is the best PSX emulator around, most complete and with the best options. It doesn't matter when the last update was. If it's good it doesn't need to get updated each month :)....

[pizzaman]

So far this is the best PSX emulator around, most complete and with the best options. It doesn't matter when the last update was. If it's good it doesn't need to get updated each month :)....
Oh okay thanks. I was just making sure. I'll check the plugins though, because Chrono Cross won't work too good.

[pizzaman]

Kameo, I still can't get Chrono Cross to start. Is there something I should do or what? I'm not exactally sure what's wrong, but when I start a new game the screen turns black and freezes.

[pizzaman]

Kameo, I still can't get Chrono Cross to start. Is there something I should do or what? I'm not exactally sure what's wrong, but when I start a new game the screen turns black and freezes.
Kameo, do you know what the problem is?

[Kameo]

Probably a plug-in issue. Otherwise Ur ISO is bad....

[pizzaman]

Probably a plug-in issue. Otherwise Ur ISO is bad....
I don't think it's bad... have you tried the game? It hangs when you start a new game, I asked at Snesorama, but they said to look through the thread because it was there. But I couldn't find anything because it was too long and confusing. :confused:

[Rikim4ru]

a couple of questions:

1. what code format (game genie, Game Shark, etc.) does epsxe use for cheats?

and

2. IF im playing the game from the actuall CD, is it normal for the game to freeze and load fromt he disk, this happens alot when starting random battle and casting spell on final fantasy tactics.

[boegie]

Damned :( . I downloaded the compilation of the Crash Bandicoot's games, and I wanted to play it on the ePSXe emulator...so I selected the Iso. and I played it. great, one problem :

- No sound? WTF?! I have a sound plugin selected

Okay,that's okay..I just download the "best" audio plugin, if I may believe the site, and when I start the .ISO then, I have this error :

http://img207.imageshack.us/my.php?image=damnqh6.png

what the hell is going on? oO

edit : Nevermind I just restarted my computer and it works perfect!

btw, crash bandicoot still ownz! :p

thx in advance!

-Boegie

[FERGUS_MANERGUS]

do i have to have all of the ISOs form all 3 FF7 discs to play the whole game

[boegie]

do i have to have all of the ISOs form all 3 FF7 discs to play the whole game

duh :) otherwise the Iso's won't exist :shocked:

edit: btw guys, can I buy PSX games and play them on ePSXe?

[pizzaman]

duh :) otherwise the Iso's won't exist :shocked:

edit: btw guys, can I buy PSX games and play them on ePSXe?
Yes. You can run them directally from the CD, or burn them to your HDD.

[Kit]

Oh, I just noticed this thread, and I have to say thank you! I've been trying to run this thing for so long! Thank you!

Edit: Sorted, nevermind.

[PYRO_JUNKY]

where can i find ePSXe1.5.2? i found a bunch of other ones but i dont wana get them incase they are to difrent to follow your walkthrough with. or whats the name of another one that can follow your walkthrough. also where do i find the plug ins and witch ones do i need? again i'm not sure what ones i need so i dont wana mess with it yet.

edit: and i did find a website that has every iso on it a while back. i'll see if i can refind it.

[Kit]

so if someone were kind enough...it would be most appreciated. Thanks.

I get mine by using torrents. I can't actually find any websites for downloading them from.

[seraphssavior]

Thanks anyways. I have 28k dial up until college next year, so I guess I'm just going to have to wait.

[Shiek2005]

Sorry if im asking in the wrong place but where can i find that PSX emulator (srry if i missed any links in the above posts) and PSX ROMs?

Thanks!

[Mjshl2]

Cant ask for the Roms here.
Emulator for Epsx is here:http://www.epsxe.com/

[flaco]

Well I cant find the bios for the espx where are they

[Mjshl2]

Try typing scph1001.bin in google, see what it comes up with. Thats the most info im allowed to give you.

[Bahaman]

I am new to this stuff an i love ps1 where do i get the eXPSe1.5.2 version from

[Sataki]

I'm having problems with the movie scenes in Final Fantasy IX. Everything else is fine, but the movies are playing at like 4x speed. I've tried using ePSXe 1.5.2 and ePSXe 1.6, and i've tried them both with the 2d/3d setup and the 2d setup, and I still get the problem. Anyone know how to fix this?

[Mjshl2]

I believe that is a sound problem. I had similar problems with the Fear Effect games if I remember right. Try using a different sound plugin. Peops or something.

[Kit]

I'm having a bit of trouble with Metal Gear Solid. I've been playing it on ePSXe and I'm up to Psycho Mantis, but remember that you had to switch the controller slot to beat him? Yeah, can't do that with an emulator.

So does that make beating him near-impossible or is there something you can do? (If you're really lucky you can get a few hits in without switching controller, but he usually teleports away from you.)

[Sataki]

Kit, if you're using ePSXe, you can have controls for 2 controllers set up at the same time. Never played the first Metal Gear Solid though, so I don't know if this will help.

[Sataki]

Mjshl2, I tried using Peops, but that didn't change anything. I tried fooling around with the configuration for the plugin and it still didn't change anything. I've played final fantasy ix on ePSXe before without any problems, but I have no idea what's different now.

[Sataki]

I think the problem was my graphics plugin. I noticed that some of the plugins play the FMVs faster than others, so I tried Pete's D3D Driver 1.76, and it's still going like 1.5X speed but it's better than before.

[recab2]

i noticed you have project 64k on you desktop. while i found this edition the great line unstable, i did like the multiplayer option. did you ever get it to work properly? i tried it once and nothing we did aligned with each other. just wondering.

[Iconoclast]

i noticed you have project 64k on you desktop. while i found this edition the great line unstable, i did like the multiplayer option. did you ever get it to work properly? i tried it once and nothing we did aligned with each other. just wondering.If you want to play N64 games online, use 1964, instead. Not only is it faster but more stable.

Also, for future reference, post N64 questions in N64 threads, not PSX. It's okay this time, though; I understand you were commenting on the person's desktop.

[NinjaGaiden2]

Hey Sticker Man Do you Know Why Syphon Filter 2 freezes at memory card on disc 1 right after the second train level? Please do tell!

The legendary Ninja Never Dies "NGaiden Rules"

[UberGamer]

Where can i get everything needed for all this?

[Mjshl2]

Your on your own for everything but the Emulator and Plugins.

Emulator:http://www.emulator-zone.com/doc.php/psx/epsxe.html
Plugins:http://www.emulator-zone.com/doc.php/psx/psxplugins-tools.html

Try searching for scph1001.bin in Google. Thats the Bios you need, don't ask any more info about it here.

Your on your own for the Roms.

[D. Wizzle.]

Thank for this, nvm just saw that post, ^lol.

[seraphssavior]

O.K., I've got everything set up right, and the resolution has been changed properly, but I'm having trouble figuring out how to run games that I own from the CD drive in the emulator...I'm using ePSXe, and I click on run CDROM. A black screen comes up with the FPS data in the upper left corner, then nothing happens after that...any advice? Thanks!

[metalmight]

Oh version 1.5.2 is less buggy than 1.6.0? Maybe that will help with my problem. I am having trouble with 1.6.0 getting analog controls to work. I can only get Spyro 1 to work with analog. I will try 1.5.2 :)

[doowoppdoowah]

Oh version 1.5.2 is less buggy than 1.6.0? Maybe that will help with my problem. I am having trouble with 1.6.0 getting analog controls to work. I can only get Spyro 1 to work with analog. I will try 1.5.2 :)

why stick to one brand of emulator? there are other GREAT emulators....ssspsx, pSX...

[metalmight]

why stick to one brand of emulator? there are other GREAT emulators....ssspsx, pSX...
No. You see, I have tried every emulator and every input plugin and only Spyro 1 works with analog control on ePSXe with internal input plugin. By the way I tried 1.5.2 and still no success... Can anyone please help me get analog control for PSX emulation? I especially want it for Gran Turismo. It makes steering a lot easier. :)

[DukeNukem!!!]

Thanx from the duke.

[Kit]

Kit, if you're using ePSXe, you can have controls for 2 controllers set up at the same time. Never played the first Metal Gear Solid though, so I don't know if this will help.

Sadly that wouldn't work, if I remember correctly you had to unplug the controller in slot 1, and with ePSXe you can't do that while a game is running. So I'm stuck there, I'm going to see if I can find a memcard file past that bit, it'll be tough but 4chan could prolly get me one.

[papuccino1]

Thanks a lot for the guide. It REALLY helped out.

[vellocet]

hey guys, nice to meet all of you. I got a question.

I got this up and installed and all the plug-ins and BIOS are ready. Now when i go to play a game, it starts up fine. But about a minute in, every single game, My computer starts to do constant freezing:
(it will freeze every minute, then unfreeze for about 1 second)

Could this be a problem with my graphics card? Monitor? Maybe something to do with overheating? Any help will be appreciated, thanks guys.

Oh ya, and SNES emulators and games work fine, and i would say about half of N64 games freeze and half work ok.

Thanks for the emulator support, i cant wait to play some of my fav. RPGs on PSX.

[Majora_younglink]

hey guys, nice to meet all of you. I got a question.

I got this up and installed and all the plug-ins and BIOS are ready. Now when i go to play a game, it starts up fine. But about a minute in, every single game, My computer starts to do constant freezing:
(it will freeze every minute, then unfreeze for about 1 second)

Could this be a problem with my graphics card? Monitor? Maybe something to do with overheating? Any help will be appreciated, thanks guys.

Oh ya, and SNES emulators and games work fine, and i would say about half of N64 games freeze and half work ok.

Thanks for the emulator support, i cant wait to play some of my fav. RPGs on PSX.

Well, the PSX is new and will take some time to emu properly. Speaking for myself I think it would be best if you make a new thread explaining your own problems...

[Gaming4JC]

Well, I don't know exactly what the topic is of this unusual topic, but ePSXe is very easy to emulate and use(and has been for ages...). There are even tuts on setting it up around these forums.
Official ePSXe: http://www.epsxe.com/
Official Forum's site, with Plugins listed: http://www.ngemu.com/psx/epsxe.php?action=plugins

Also don't forget to use PEC (PSX Emulation Cheater) to use those favorite GS(GameShark) codes. ;)
PEC Homepage: http://www.emucheater.com/

Driverguide's has various BIOSs, search their database.

Need any more help, and I'm sure one of the old timers here at Coolrom can help. :D

Or I could...



Gaming4JC

[Pouso-G]

Awsome great I just have one question about the PSX emulator and ePSXe too, I keep getting missing WNASPI32.dll file errors, I think Im missing and the error pops up after Config>Video menu
can anyone tell me where to get these files


If you have problems with DLL files, go look at www.DLL-Files.com (http://www.DLL-Files.com)
You should find it there. Just copy them to the WINDOWS\SYSTEM folder and you should be fine!

[Iconoclast]

Well, the PSX is new and will take some time to emu properly. Speaking for myself I think it would be best if you make a new thread explaining your own problems...Kid, are you ****ing retarded?
The PSX is not new. It's equally as old as the N64, for that matter. It's actually rather easy to emulate compared to some of the other platforms. Besides, there are platforms that are old as hell and still hardly even emulated.
"Speaking for myself," means everything after that sentence is directed to yourself and no one else. Learn English....

[Klendathu]

Kid, are you ****ing retarded?
The PSX is not new. It's equally as old as the N64, for that matter. It's actually rather easy to emulate compared to some of the other platforms. Besides, there are platforms that are old as hell and still hardly even emulated.
"Speaking for myself," means everything after that sentence is directed to yourself and no one else. Learn English....

I'm going to agree with Iconoclast and say The PSX is easily emulated.
I've just experienced minor sound issues.
With epsx you don't even need to mount the iso's.

[Iconoclast]

Yes, Majora, start a thread on your own problems, instead of waiting ten months after a thread's creation to look at it for the first time, say something stupid like you're in charge of the thread, and never even look at anyone's responses. Damn, what country is this guy from....

[darko101]

when i try to run crash team racing on pSX 1.4 i get this message : "SPTI Error A device attached to the system is not functioning" help plz

[djfurious]

If EPSXE doesn't work for you, there's another great PSX emu: Its called pSX. Its a new emulator, but already plays most games without problems. Its easy to use and doesn't requires a great computer.

Here's a step-by-step how-to-use:

1. Get the emulator here:
http://psxemulator.gazaxian.com/pSX_1_4.rar

2. You'll need the d3dx9_26.dll file. Get it here:
http://www.dll-files.com/dllindex/dll-files.shtml?d3dx9_26
(Click on "Click here to go to the download of d3dx9_26.dll")

3. Download the PSX bios somewhere. AND JUST LIKE KAMEO SAID, THE SCPH1001.BIN WORKS FOR ANY GAME, NOT JUST US GAMES!

4. Extract the emulator and then extract the .dll file on THE SAME PLACE as the emulator. Then extrack the bios file on the BIOS folder.

5. Open the emulator. You'll see the Bios logo. Go to "FILE", then "CONFIGURATION".

6. Go to the "GRAPHICS" menu and DISABLE "frame skipping".

7. Go to the "MEMORY CARDS" menu and click on the "..." button on the right side of the slot 1 line. Then just type the name you want on the file name command line.

8. Then go to the "CONTROLLERS" menu to set up the controllers.

9. Now just click OK.

10. To start a game from a CD, just go to the "FILE" menu and select "INSERT CD DRIVE" and select your CD drive. Look the pic: my CD drive is F:
http://i14.photobucket.com/albums/a348/Brasilidade/pSX.gif

11. Wait for the game to load, and have fun. Oh, and to make the game run at FULL SCREEN, press ALT + ENTER.
http://i14.photobucket.com/albums/a348/Brasilidade/pSX2.gif


BTW, you can FAST FORWARD the game by holding down the BACKSPACE key. :)

dude where can u Download those PSX bios??

[bigbaconman]

can somone sned me that bios scph1001 everyones talkin about cuz i desperately need it

[Systemeth]

"Speaking for myself," means everything after that sentence is directed to yourself and no one else. Learn English....

*BUZZ* Sorry that's incorrect!
"Speaking for myself," means that he is speaking for only him. It's as opposed to things such as "I think I speak for everyone here when I say..."

But using it as Maj did was redundant.

[kristoffer7]

Where do I find the 1.5.2 version? I got the 1.6.0 version here instead and I can't download the emulator. Do the others work, and if so, what are the steps to get them to work. Thanks.

[Pouso-G]

Look at the downloads on the programmers site:
http://www.epsxe.com/

[kristoffer7]

Okay, so I found 1.5.2. but there are no other files for BIOS or PLUGINS, with the exception of "erase.me" in the BIOS folder and "remove.me" in the PLUGINS folder. What now? Also, I need to configure the Video Plugins but don't have any options to put in the box. :mad2:

[tatsuya1221]

You'll have to google for the scph-1001 bios, that's something we can't tell you how to find, but i think you can find it if you use any search engine.

The video plugins can be obtained fairly easily as well by just copying and pasting the plugins names into your search engine.

[pickleschanci]

This thread was really helpful. I was having horrible lag on my epsxe. Now I have almost none.

At the same time though, is there a way to make it run with even less lag? It's still a bit of a problem sometimes, during the more intense parts of games.

[tatsuya1221]

I thought i'd mention that epsxe 1.70 seems to work much better than 1.60 or 1.52 for me, just thought i'd throw that out there for someone to tell me if i'm right or not.

[iNFiN1TY]

With this program you can only play ''roms''?

[Kyoukan09]

I've done everything correctly, but when i load my game it says ...

ERROR: Unable to initialize memory.

Whats up with that?

[Carnivoracious]

ePSXe issues...

I'm running an FF9 ISO (.bin actually) on ePSXe v1.6.0 using the settings and plugins reccomended on the first page of this thread and while it seems to run the actual gameplay and FMVs fine, there seems to be some frame lag whenever I pull up the game's menu or whenever the game enters a random encounter (the battle swirl thing). I've also tried using the automated "fast" settings in ePSXe and that not only doesn't fix the framerate in the menu/battle transition, it runs the game ludicrously fast otherwise.

The system I'm using is considerably newer and faster than many that were mentioned earlier in the thread (not bragging, I promise:) ). Is this a problem that anyone else has had? Is this unique to this version of ePSXe? I'm using Pete's openGL 1.77, should I be using a different graphics plugin? I could play the game like this if nothing can be done, but it's seriously annoying. :mad2: Any insight would be appreciated.

[tatsuya1221]

ePSXe issues...

I'm running an FF9 ISO (.bin actually) on ePSXe v1.6.0 using the settings and plugins reccomended on the first page of this thread and while it seems to run the actual gameplay and FMVs fine, there seems to be some frame lag whenever I pull up the game's menu or whenever the game enters a random encounter (the battle swirl thing). I've also tried using the automated "fast" settings in ePSXe and that not only doesn't fix the framerate in the menu/battle transition, it runs the game ludicrously fast otherwise.

The system I'm using is considerably newer and faster than many that were mentioned earlier in the thread (not bragging, I promise:) ). Is this a problem that anyone else has had? Is this unique to this version of ePSXe? I'm using Pete's openGL 1.77, should I be using a different graphics plugin? I could play the game like this if nothing can be done, but it's seriously annoying. :mad2: Any insight would be appreciated.

Well first get rid of epsxe 1.60, it's buggy as heck, epsxe 1.70 is supposed to play it perfectly with the right plugins.
Plugin reccomendations:
Video:Pete Opengl v2.9 (needs a good comp)
Pete opengl 177
Peops Soft Driver v118
CD ROM:internal cd rom plugin
Sound:Internal ePSXe plugin(plays great on most games, mix and match plugins for others)

Anyway 1.60 has alot of problems, 1.70 beats the heck out of it.

[smiley_988]

im having baaaad issues with ISO's and such,

i download the file (take brave fencer mushashi for example)
i downloaded both parts, combined them, but it still doesnt show as a bin or any other type :( please help :_(

[cannyeo]

im having baaaad issues with ISO's and such,

i download the file (take brave fencer mushashi for example)
i downloaded both parts, combined them, but it still doesnt show as a bin or any other type :( please help :_(

If you combined them , normally they will change into ZIP.file /WINRAR archive , afterwards extract it , and there you have it a BIN file .

maybe you did not combine them ? Theres a tools for combining them where you have to get it from the place you download the ISOs .

[cannyeo]

Now here comes a real problem .

It happens when i play Vandal Hearts 2 ,

When the game is in battle , the frame which the characther is performing an action stopped , and it resumes after the action is finished .

im Using Pete's OpenGL Driver 1.75 for video plugin .

I have tried to change the configurations until i gone mad , but it still goes like this .

[smiley_988]

If you combined them , normally they will change into ZIP.file /WINRAR archive , afterwards extract it , and there you have it a BIN file .

maybe you did not combine them ? Theres a tools for combining them where you have to get it from the place you download the ISOs .

ok well i have combined them and it doesnt show as zipped but its saved as a 7z file

[cannyeo]

What game is that ?

[Carnivoracious]

Well first get rid of epsxe 1.60, it's buggy as heck, epsxe 1.70 is supposed to play it perfectly with the right plugins.
Plugin reccomendations:
Video:Pete Opengl v2.9 (needs a good comp)
Pete opengl 177
Peops Soft Driver v118
CD ROM:internal cd rom plugin
Sound:Internal ePSXe plugin(plays great on most games, mix and match plugins for others)

Anyway 1.60 has alot of problems, 1.70 beats the heck out of it.

Dude, this works so much better. Thanks for the help.

[lostxx89]

don't have a video plug-in, wheres that come from?

[tatsuya1221]

don't have a video plug-in, wheres that come from?

Go to the download section and download winston's epsxe 1.70 pack, it comes with all the plugins.

[lostxx89]

I can only find a epsxe 1.6 on the sony playstation downlaods, could you give me a link?

[tatsuya1221]

I can only find a epsxe 1.6 on the sony playstation downlaods, could you give me a link?

Forgot it was in plugins:
http://www.coolrom.com/forums/showthread.php?t=8506

[krimson]

Yes I agree, very well done walkthrought Kameo!
But here I am, with a new desktop, a PSX controller, and chrono cross 2 discs (bin and cue) wondering what to do with them, I have 2 PSX emulators, one is Bleem! and the other might be ePSXe but I am not sure. and do not want to use Bleem! because it is not a full version only it with a crack file and I dont know if there is a better program that will run appropratly I could use some help, I plan on backing chrono cross up to disc, so. Once I have desktop set up....what program is best to play PSX discs and backup files?

use epsxe, it rocks. i'm using epsxe 1.7 which seems to run chrono cross fine, and the epsxe boys seem to have ironed out the glitches in epsxe 1.61

[posionace195]

i find epsxe works best

[Authorize]

Okay so I'm using PSX Even, looks like maybe one of the easiest to figure out out of these PSX emulators. But I can't figure out how to run the emulator files which I downloaded. Or am I supposed to put my PS1 disc into my disc drive and run it from there?

The main reason why I'm doing this is because I don't wish to sit in my cold damp basement to play a game that I love, I'd rather play it up here.

If someone could help me out, that'd be great. Thanks. :]

[tatsuya1221]

Okay so I'm using PSX Even, looks like maybe one of the easiest to figure out out of these PSX emulators. But I can't figure out how to run the emulator files which I downloaded. Or am I supposed to put my PS1 disc into my disc drive and run it from there?

The main reason why I'm doing this is because I don't wish to sit in my cold damp basement to play a game that I love, I'd rather play it up here.

If someone could help me out, that'd be great. Thanks. :]

So you intend to play real discs and not disc images?
It should have a boot cd function in the menu then if you have it configured to the CD drive.

Also the easiest emu to use is pSX 1.13 fyi.

[Authorize]

So you intend to play real discs and not disc images?
It should have a boot cd function in the menu then if you have it configured to the CD drive.

Also the easiest emu to use is pSX 1.13 fyi.

I don't know if it has the capability to play with real discs, which is what I'm asking. Because I have no idea what I'm doing. PSX emulators seem to be the most confusing out of the bunch of them. :/
I'm a bit nervous about putting the cd into my pc, y'know so I'd rather get the file off the net. Or just venture down to my basement, I suppose.

[tatsuya1221]

I don't know if it has the capability to play with real discs, which is what I'm asking. Because I have no idea what I'm doing. PSX emulators seem to be the most confusing out of the bunch of them. :/
I'm a bit nervous about putting the cd into my pc, y'know so I'd rather get the file off the net. Or just venture down to my basement, I suppose.

Well running files is easy usually, however i know next to little about psx even, i never saw a need to use it, epsxe and psx have far better compatibility and all, anyway even if you can't run iso's directly you can use virtual drives like daemon tools to mount the image like a cd.

Sorry but this is all i know, someone else should be able to help you with psx even.

Also imo saturn emulation is harder and dreamcast even moreso.

[Authorize]

Well running files is easy usually, however i know next to little about psx even, i never saw a need to use it, epsxe and psx have far better compatibility and all, anyway even if you can't run iso's directly you can use virtual drives like daemon tools to mount the image like a cd.

Sorry but this is all i know, someone else should be able to help you with psx even.

Also imo saturn emulation is harder and dreamcast even moreso.

Alright, well thanks for your help. Hopefully eventually I'll figure it out, or I'll just play downstairs. Might just be better and a little less effort exerted (yes I'm lazy).

[mpferguson0416]

Ok, so I've got my ePSXe all set configured, but the game I'm trying to run is Suikoden 2, and it's a .rar file. I've been doing "run ISO" and selecting it, and I get a black screen, what am I doing wrong, and what do I need to do?

P.S. I'm really new to this, so I don't know to much of what I'm doing.

UPDATE: I figured it out, I used WINRAR on the file and made it an .img file and can now run the game.

[bevestird]

i followed your directions exactly and it didnt work...
i changed the game file from a rar file to a img file and i even used grandia to try it out and it wont work.
when i load the game it doesnt show anything but a blank screen...
any sugestions? :confused:

also i can run the bios fine, except that their is no green...

[ikanalpha]

were can i find the video plug ins?

[bevestird]

Search google for plugins.

What are you trying to play?

[popppppo]

just looking for some help but i downloaded the epsxe 1/7 version on here with all the bios and plug ins and I ran the configureation, and I downloaded breath of fire 3. I have 2 versions, one is a .7Z file and the other is in 3 parts and is .RAR, cn someone give me some help to get it to work because when I try to run it is just a blackscreen

[tatsuya1221]

just looking for some help but i downloaded the epsxe 1/7 version on here with all the bios and plug ins and I ran the configureation, and I downloaded breath of fire 3. I have 2 versions, one is a .7Z file and the other is in 3 parts and is .RAR, cn someone give me some help to get it to work because when I try to run it is just a blackscreen

Well first you have to unzip them, they don't run zipped.

[bevestird]

just looking for some help but i downloaded the epsxe 1/7 version on here with all the bios and plug ins and I ran the configureation, and I downloaded breath of fire 3. I have 2 versions, one is a .7Z file and the other is in 3 parts and is .RAR, cn someone give me some help to get it to work because when I try to run it is just a blackscreen
You definately didnt download the bios from this site cause it doesnt have it! And be sure not to ask for it here, thats a nono! :nono:
But if you unzip them, and then use winrar to unzip the games it will work for the most part...

[TRICKSTA09]

I GOT AN ERROR IT SAYS WHEN I RUN CDROM IT SAYSNO No wgl extensions how do i fix this

[Alex_Strider]

I found a plugin "gpupeteogl209" but i was hoping if someone had a link to the one thats shown in the tutorial.

[thisnameistaken2]

I can't help but notice you background. All the colors look cool. that is a nice wallpaper.:) lol

THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU

i could not remember the name of that game for the life of me THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU
EDIT*

um sorry i clicked the wrong quote damn :(

anyway i meant to click the one about team buddies >.> :(

[bluematter08]

I've been trying to emulate games forever now and most sites don't walk you through it well enough to figure it out. After finding this I was able to play the games from my childhood again! Also thanks to Tatsuya I'm able to play the classic RPG's that made me fall in love with fantasy so much. You're both awesome!

[sablaylage]

i tried the guide you made but when i open the emulator and play the game, it's just black w/o video but it has sounds.. pls help me!!!

[Mr.Lonely]

Hey I just want to know. A while back I bought a PS2 to PC usb converter for my controller. Is it possible to use this with my PSX emulato? If I need to more specific I am using PSXeven v0.18. Thanks!

[Pizza1295]

Hey I just want to know. A while back I bought a PS2 to PC usb converter for my controller. Is it possible to use this with my PSX emulato? If I need to more specific I am using PSXeven v0.18. Thanks!

if it can to plug into a usb port,it can work!

make sure you have newest ver tho ^^

[turkeybeater]

Hey how do u get the BIOs that u mentioned??? cuz I have like none

[tatsuya1221]

Hey how do u get the BIOs that u mentioned??? cuz I have like none

http://www.coolrom.com/forums/showthread.php?t=8530

[Mr.Lonely]

if it can to plug into a usb port,it can work!

make sure you have newest ver tho ^^So what is the newest verison? d@_@b

[Pizza1295]

So what is the newest verison? d@_@b

hmm,i really dont know,but im pretty sure its one of the easiest things to find without asking ^^

im pretty sure winston's epsxe download is the newest ver,however i cant really download anything right now because my bro would freak out,so you can assume his download is the newest version

[andyelmo]

i've downloaded v1.7.0 (from winston's thread and used kameo's excellent walkthrough.
i try to play my iso file but epsxe crashes.
any suggestions?

[goldenwingedship]

i've downloaded v1.7.0 (from winston's thread and used kameo's excellent walkthrough.
i try to play my iso file but epsxe crashes.
any suggestions?

Just check the other threads I replied on. I am fairly certain that your problem is the use of PowerISO.

[xavier_pr84]

nice tut very good

[10collty]

This is what i have been looking for :)
a great easy to follow guide.

Edit:
I got my problems sorted =)

[matty7910]

ive got mine set up how do i convert a cd rip to play on espxe:mad2:

[goldenwingedship]

ive got mine set up how do i convert a cd rip to play on espxe:mad2:

Well, if you ripped it correctly you don't need to convert it. Take a look at this thread. It should help you --> http://www.coolrom.com/forums/showthread.php?t=9137

[tylerduquette]

I was just wondering if any one know where to get some video plug ins for epsxe that will run ffIX properly..thanks
tyler

[GameGeeks]

Try pete's open gl 1.7.

[Prilj]

Hello all.

I'm new to this site, though not new to emu/roms.

I've been having trouble when trying to configure my epsxe160. It keeps saying that there isn't anything in the bios, despite me downloading the SCPH1001 and saving it in the bios folder.

I looked at the first post of this thread, but there wasn't any info or links to info within it. (I'm not sure if I have to "earn" the right to see the link, like I do with images, so please don't flame me for my question.)

Can anybody help me with this issue?

Also, while I'm here, I downloaded suikoden and final fantasy origins; will I be able to play them on the epsxe160, properly, or will I need to download any other plug-ins, drivers etc...?

Thanks in advance for any help you can give. :)

[GameGeeks]

First I suggest upgrading to 1.7 and see if that solves your problem.

[Prilj]

I keep getting an "Oops! This link appears to be broken" page when I click the link in the Playstation emulators topic. :(

[inchdix]

I have a very weird problem with ePSX. After configuring the emu it seems that it runs ok but STUPID FAST ..... so fast that the game is uncontrollable, both with ISO's and original game disks.

Is there something really obvious I am missing out in the setup ?

My system specs are decent enough but nothing ridiculous ......

centrino duo 2.0Ghz
2 Gb ram
512Mb Nvidia 7900gs
200 Gb HDD (if it matters)

Or would I be better off trying a different emu ??

[Ryu]

From the graphic plugin enable fps limit and select auto detect.

[inchdix]

Ok thx Ryu,

just out of curiosity, which grahpics plugin would you recommend using ?

I get silly speeds with pete's D3D drivers and slightly slower with the first open GL one and then down to about 2-3 times normal speed with the open GL2 driver.

Plus, what other settings would you recommend enabling in the config for drivers ......

BTW ..... the current default framerate limit is set at 200.0 ..... I take it this is a bit high ??

[Ryu]

Ok thx Ryu,

just out of curiosity, which grahpics plugin would you recommend using ?

I get silly speeds with pete's D3D drivers and slightly slower with the first open GL one and then down to about 2-3 times normal speed with the open GL2 driver.

Plus, what other settings would you recommend enabling in the config for drivers ......

BTW ..... the current default framerate limit is set at 200.0 ..... I take it this is a bit high ??
As I said, you have two options: auto detect and input yourself(in which case you should change 200.0 to 60 or 50).
Since PAL games function at 50 fps and NTSC at about 60 fps I think auto-detect is the best option since it should work fine with both, the emu selecting the proper frame rate.
Here is a suggestion of a plugin configuration that gives you good graphics and no speed penalty.

[kirhidemi]

guys i bought game controller a dual shock one, but when i try to use it.. it does not give a nice feedback regarding in vibration.. in test mode the controller vibrate nice but in real game it does not vibrate just like when in test mode... do i need to configure some thing in epsxe or in the controller itself??

[Ryu]

guys i bought game controller a dual shock one, but when i try to use it.. it does not give a nice feedback regarding in vibration.. in test mode the controller vibrate nice but in real game it does not vibrate just like when in test mode... do i need to configure some thing in epsxe or in the controller itself??
Well, yea you can configure the rumble in the controller plugin of the emulator.

[romea32]

u can try xxxxxxxxxxx go to the forum page and join the kid who runs the site is sick with all that stuff he got it to work for me and hooked me up with some good games but he only talks with members. the site has some great roms easy to download. enjoy

[Ryu]

u can try xxxxxxxxxxx go to the forum page and join the kid who runs the site is sick with all that stuff he got it to work for me and hooked me up with some good games but he only talks with members. the site has some great roms easy to download. enjoy
Damn, I'm curious now.
If someone reads this and knows what site this guy was talking about please PM me.

[Mindviolence]

I like emulating my games better than playing them on my consoles... mainly for graphical reasons. but My n64's controller is ideal for my n64 games... Does anyone know how to convert an n64 controller to usb?

[Ryu]

I like emulating my games better than playing them on my consoles... mainly for graphical reasons. but My n64's controller is ideal for my n64 games... Does anyone know how to convert an n64 controller to usb?
http://59aku.fam.cx/new/pad/n64_psx_usb4%5B1%5D.jpg

[GameGeeks]

Yeah, that's the best way to do it if you don't want to hack the controller itself which requires you to know things like sodering and circuit boards.

[Ryu]

Yeah, that's the best way to do it if you don't want to hack the controller itself which requires you to know things like sodering and circuit boards.
Or you can always build your own custom made controller.:D

[GameGeeks]

Good luck creating the shell of the controller.

[Ryu]

Good luck creating the shell of the controller.
Thanks! :D

[Will_89]

I SOOOOOO need help with this if anyones kind enough. Final fantasy's are incredible and i really wanna play them again.

Its not running though. ive downloaded the 1st disc for FF8 & all the emulators incase somehow it wouldnt work, and the game just wont Play.

HELP!!!!!!!!!!!!!!

[GameGeeks]

This guide explains how to get epsxe working. Try that and let me know if it doesn't work.

[highlander4]

hello just wanted to say hi and does configuration for this ePSXe work for upper versions?

[Will_89]

Ive got something on my mind about emulation. Why in the hell can i now not download final VIII disc 2 on the "ROM files" FF8 thread. It says that i now need 15 posts in order to view the forums for psx.

LAME.....and if i spam 9 more messages im gonna get the big boot.

Whos dumb idea was it to do that???

Is it trying to prevent people from downloading straight away??? because if so, it seems pointless in doing so.

I mean what difference is a minor 15 posts gonna make due to somebodys access in downloading a game.

None , thats the answer.

[turkeybeater]

So for the mirrored disc 2 by goldenwingedship, I downloaded all four parts. Then I extracted all four of the parts with WinRAR but I cant make the files able to play onto my ePSXe...I have all the necessary parts for the emulator to work...does anybody have a method of how they get these ISOs to work??? THx

[N1ghtWalff]

When you say you extracted all four of the parts... exactly what file did you get? and what do you get from epsxe when you open that iso?

[starrstarr]

:)thanks very much mateyo

[AzuraSky]

thx alot it works great my only question is how do i input gameshark/codebreaker codes?

[tornadojoe]

I was wondering if there is anything special i can add to psx 1.13 cus when i play CTR the game runs about a half a second slow... i know its not much but u can really notice it while music is playing on each race...when i use the frame skipping the music is just fine but the game actually skipps so either way its not perfect

[Carney44]

Hi everyone,
I'm just trying to configure ePSXe and i just can't get the GPU plugin

I keep downloading Pete's OpenGL, but none of them are working, do i need a specific one exactly or what??? i would really appreciate any help that can be given

Hi everyone,
I have been trying to configure ePSXe but i can't get the GPU plugin

could anybody help me out with this???

any help would be greatly appreciated

btw, sorry about the double post, pc had a spaz attack, just wanted to make sure it went through

ok I feel really stupid right now, i fixed it haha, sorry guys

[exewon]

The pictures in the first post aren't visible anymore now I can't use the walkthrough because it is constantly refering to those. Anyone can Help?

[N1ghtWalff]

The pictures in the first post aren't visible anymore now I can't use the walkthrough because it is constantly refering to those. Anyone can Help?

even without the pictures all the steps are clearly explained. Try to follow the text, and if you have specific questions then we can help but you should be fine.

[itsuki]

i just downloaded 1.7.0 and i was wondering if i need to download any bios for it (plus what is a bio?), i downloaded the zlib (or whatever its called and put it in system32), the only thing in the bio folder was an item called erase.me (im pretty sure i should erase that)

[kaosdeity]

i just downloaded 1.7.0 and i was wondering if i need to download any bios for it (plus what is a bio?), i downloaded the zlib (or whatever its called and put it in system32), the only thing in the bio folder was an item called erase.me (im pretty sure i should erase that)

A BIO is sorta like the DNA of the emu (if anyone has a better explanation throw it out there) it is pulled from an actual console and is needed for the emulator to run. The reason the erase.me was there is because it was just a place keeper for where the Bio goes (though I don't know why people don't use bio_here.txt anymore, makes more sense to me) but tbh hunting that crap down is a pain, use winston's; it is already ready to play.

http://www.coolrom.com/forums/showthread.php?t=8506

[itsuki]

im hitting the download button and the page just keeps reloading......

[N1ghtWalff]

im hitting the download button and the page just keeps reloading......

restart your browser and clear the browser cache. If that fails, reboot your computer

[exewon]

I found a way to use a PS3 controller on your computer. I will put it up in a while (maybe). But I don't know how to use it with ePSXe? anybody know's?

[DaBlueBomber]

i never downloaded a emulator and want to because of legend of mana and i can see where i can download psx and the rom for the game but do i need to download the plug ins or are they in the psx file?

[kaosdeity]

i never downloaded a emulator and want to because of legend of mana and i can see where i can download psx and the rom for the game but do i need to download the plug ins or are they in the psx file?

My post above has a link to Winston's emulator, and his has all the plugins included.

[nayefo]

Guys where can I find a good psx emulator for the mac? I downloaded PCSX 3 but I don't know how to use it or the PSX roms. Do I have to write their images into CDs then use them in the emulator?

[exewon]

I have installed a controller on my pc but I don't have a clue how to use it with ePSxe can anybody help?

and I found a good site that explains how to use a PS3 controller on you PC if you have windows 7 www dot hardcoreware dot net/how-to-playstation-3controller-64-bit-windows-7-vista/

[sallamyemen]

for all interested in emulators i have very sources for psx emus but stil waiting for posts to be 15 to send the link:mad2:

[Yummehrice]

If EPSXE doesn't work for you, there's another great PSX emu: Its called pSX. Its a new emulator, but already plays most games without problems. Its easy to use and doesn't requires a great computer.



So I downloaded this PSX emulator; following Remorse's suggestion. However, I can't seem to play PSX roms on this emulator.. does anyone know why?

Maybe it's because I'm not exactly familiar with the program xD but I tried converting the .bin file to .cdz and I still have no idea how to run the Castlevania PSX game I downloaded :skep:

[oberndorfer]

does this emulator work for chrono cross?:confused:

[N1ghtWalff]

does this emulator work for chrono cross?:confused:

epsxe 1.7.0 runs it well with pete's DX6 video plugin

[AmandaTaylor64]

I'm pretty new to all of this and I'm trying to figure it out.... I've found a ton of different plugin and bios files and I'm so confused on what files I should use. Any help??

After that I should be okay, the walkthrough looks easy to follow. Thanks!!:D

[N1ghtWalff]

I'm pretty new to all of this and I'm trying to figure it out.... I've found a ton of different plugin and bios files and I'm so confused on what files I should use. Any help??

After that I should be okay, the walkthrough looks easy to follow. Thanks!!:D

it depends what game you want to play... for video Peops works well for 2D games, and Pete's plugins work well for 3D games. For sound epsxe spu core and Eternal work well.

Those are guidelilnes for most computers... it all depends on your pc and video card. Start there, then as you get used to it you can try different plugins and change the settings to get more out of it. If ou have a somewhat decent pc, you can get better results with epsxe than with the real console.

[str8kracker]

i need a little help with tombraider 1 for psx , i cant find the iso anywhere or at least one that works. so i bought the original game disc and i cant figure out how to play it on epsxe 1.6.0 . im thinking i could change it to a iso but i dont know how, any suggestions thanx.

[N1ghtWalff]

i need a little help with tombraider 1 for psx , i cant find the iso anywhere or at least one that works. so i bought the original game disc and i cant figure out how to play it on epsxe 1.6.0 . im thinking i could change it to a iso but i dont know how, any suggestions thanx.

use Alcohol 120% or CloneCD to create an image of the disc.

And you should upgrade to ePSXe 1.7.0.

[DukeNukes]

Ive donloaded the ePSXe emulator(its the 1.7.0 version) . Ive got the sound configuration done and the bio and cd rom done aswell, but when i do a video config and do the drop down button it is blank.

I have downloaded all the graphic plugins and moved them to the plugin folder. when i try to start up a game such as bust a groove ;). It says video not configured go and choose a plugin but then i go there and is it is still blank.

Any help will be appreciated thanks :p

[N1ghtWalff]

Ive donloaded the ePSXe emulator(its the 1.7.0 version) . Ive got the sound configuration done and the bio and cd rom done aswell, but when i do a video config and do the drop down button it is blank.

I have downloaded all the graphic plugins and moved them to the plugin folder. when i try to start up a game such as bust a groove ;). It says video not configured go and choose a plugin but then i go there and is it is still blank.

Any help will be appreciated thanks :p

If it's blank, then it means the video plugins are not in the proper folder or it's the wrong files... anyways there's something wrong there for sure.

Try this one, it has everything already set up:

http://rapidshare.com/files/358310018/e170.rar

[DukeNukes]

Ive downloaded it and moved it to the plug ins folder and it is still blank. Damn emulator.:mad2:

Should i put the plug ins into another folder or something.

Thanks for the help:D

[N1ghtWalff]

Ive downloaded it and moved it to the plug ins folder and it is still blank. Damn emulator.:mad2:

Should i put the plug ins into another folder or something.

Thanks for the help:D

What did you move and where? That's the problem; the file I sent you is ready to go... you just open epsxe.exe without moving anything.

[str8kracker]

thanx night walf for the quick response and advice . i used clone cd and it worked great up to the menu screen for tombraider after i select new game it just goes blank , do you have anymore suggestions. i also have epsxe 1.7.0 now. thanx am i doomed to never play tombraider 1 .... nooooo

[N1ghtWalff]

thanx night walf for the quick response and advice . i used clone cd and it worked great up to the menu screen for tombraider after i select new game it just goes blank , do you have anymore suggestions. i also have epsxe 1.7.0 now. thanx am i doomed to never play tombraider 1 .... nooooo

tomb raider 1 seems to be hard to emulate... what plugins did you try?

[str8kracker]

for video i tried using petes opengl 2 but its giving me problems so im using opengl 1.78. for sound im using peops dsound 1.9 and cdrom im using peops cdr driver 1.4 . I saw somewhere else they suggested making it a mdf file. so i did with daemon tools , so i tried it as a mdf file and nothing happened. thats as much as i can tell you. thanx

[BlessidMerc]

Is it possible to use PEC with emulators other than ePSXe?

[N1ghtWalff]

for video i tried using petes opengl 2 but its giving me problems so im using opengl 1.78. for sound im using peops dsound 1.9 and cdrom im using peops cdr driver 1.4 . I saw somewhere else they suggested making it a mdf file. so i did with daemon tools , so i tried it as a mdf file and nothing happened. thats as much as i can tell you. thanx

for video try Petes D3D and Peops... it worked for me

[MikeB214]

Is there a way to play FFVIII properly on ePSXe1.7.0? It's only worked with PSXeven for me, but I've heard ePSXe1.7.0 is better with a slightly better compatibility list. Might you know how to fix my problem, N1ght?

Oh yeah, forgot to mention, the problem I was having with FFVIII on ePSXe was during battles my menus wouldn't come up.

[N1ghtWalff]

Is there a way to play FFVIII properly on ePSXe1.7.0? It's only worked with PSXeven for me, but I've heard ePSXe1.7.0 is better with a slightly better compatibility list. Might you know how to fix my problem, N1ght?

Oh yeah, forgot to mention, the problem I was having with FFVIII on ePSXe was during battles my menus wouldn't come up.

Click on the "Best" button in video config

[str8kracker]

thanx for all your help nightwalf , i almost gave up trying . then i decided to download psxfin and try that. and i am glad to say i am now playing tombraider 1 by playing it straight thru the cd drive and it works perfect. so anyone who has trouble with tombraider 1 i hope my questions and nightwalfs anwsers has helped you . thanx again

[romsarebomb]

I'm running Arc the Lad 2 on epsxe 1.70. The sound was working perfectly fine before.

I copied all my save files eventually onto 1.52 because I wanted to run Arc 1 on high speed (1500%+ ftw), beat it then use the save conversion feature into Arc 2 to get the extras. I started the new game in Arc 2 with the conversion and got back to the point where I was before on high speed. Then I copied those saves back onto 1.70.

I put the video and audio settings exactly to where they were when I began playing in the first place a few days ago. Pete's OpenGL2.9 driver on the "nice" setting for video. Eternal SPU 1.41 on the default settings for audio. It should sound perfect and dandy just like before, but no.

The sound is really low quality, doesn't work for any longer than 10-20 seconds and then it stops. Then a few seconds later some really scrambled sounding crap starts happening, which plays for a few seconds even after I close the emulator for some reason.

Help?

EDIT: Okay, nevermind. I was loading from a savestate because I hadn't actually saved my game for awhile. I saved the game and loaded from that instead, and now it works. I think something glitched up in my savestate file when I copied it beck over to 1.70.

EDIT 2: But now the game is running a little slow, which is ridiculous since my computer was able to crank it to 1500% in 1.52 earlier.

EDIT 3: Okay, I fixed it. I switched to another plugin, altered some of the settings including "use fps limit", which I've set to 200 and also put the fps display on. This got my game back up to 60fps on a normal setting, but now I can also Switch to 200fps and the fastest setting which cranks me up to about 1100fps in 1.70. I was not able to crank the speed up at all in 1.70 before, so it's weird that it works now. I have no need for 1.52 now so I deleted that.

4: still slows down to below 60 during use of spells or anything "intensive" though. WTF. Im using petes dx6 d3d 1.77. I really need help, I had absolute no problems like this before.

[romsarebomb]

Well I switched to PCSX and it seems to be working fine. I'd still like some help with epsxe though.

[chrono666]

any recomendations for an up to date website with good plugins. I'm having trouble running ffXI. I'm using Pete's D3D Driver 1.76, Eternal SPU Plugin 1.41, and Mooby2 cd disk image driver 2.8. It either runs to fast or to slow.

[auronthemad]

where do i go to get the bios its saying i need scph1001.bin?

[N1ghtWalff]

any recomendations for an up to date website with good plugins. I'm having trouble running ffXI. I'm using Pete's D3D Driver 1.76, Eternal SPU Plugin 1.41, and Mooby2 cd disk image driver 2.8. It either runs to fast or to slow.

In video config set the Frame rate limit to 60, and check the box next to Set limit.

where do i go to get the bios its saying i need scph1001.bin?

This one is complete:

http://rapidshare.com/files/358310018/e170.rar

[auronthemad]

thank you very much

[Doom42]

hello can my pc run psx emu?

------------------
System Information
------------------
Time of this report: 5/6/2010, 16:09:00
Machine name: JOSEPH-PC
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600) (7600.win7_gdr.100226-1909)
Language: English (Regional Setting: English)
System Manufacturer: GATEWAY
System Model: FX541S
BIOS: Default System BIOS
Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (4 CPUs), ~2.4GHz
Memory: 3072MB RAM
Available OS Memory: 3072MB RAM
Page File: 1074MB used, 5064MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode




---------------
Display Devices
---------------
Card name: NVIDIA GeForce 8800 GTS
Manufacturer: NVIDIA
Chip type: GeForce 8800 GTS
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0193&SUBSYS_042110DE&REV_A2
Display Memory: 1894 MB
Dedicated Memory: 615 MB
Shared Memory: 1279 MB
Current Mode: 1280 x 720 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: VW32L HDTV10A
Monitor Id: VIZ0027
Native Mode: 1280 x 720(p) (60.000Hz)
Output Type: DVI
Driver Name: nvd3dum.dll,nvwgf2um.dll,nvwgf2um.dll
Driver File Version: 8.17.0011.9745 (English)
Driver Version: 8.17.11.9745
DDI Version: 10
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 4/3/2010 18:55:31, 9386600 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71E3E-42D3-11CF-7F55-2A241CC2C535}
Vendor ID: 0x10DE
Device ID: 0x0193
SubSys ID: 0x042110DE
Revision ID: 0x00A2

D3D9 Overlay: Supported
DXVA-HD: Supported
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled

-------------
Sound Devices
-------------
Description: Digital Audio (S/PDIF) (High Definition Audio Device)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10192643&REV_1000
Manufacturer ID: 1
Product ID: 65535
Type: WDM
Driver Name: HdAudio.sys
Driver Version: 6.01.7600.16385 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 7/13/2009 19:51:47, 304128 bytes
Other Files:
Driver Provider: Microsoft
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No

---------------------
Sound Capture Devices
---------------------
Description: Microphone (High Definition Audio Device)
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: HdAudio.sys
Driver Version: 6.01.7600.16385 (English)
Driver Attributes: Final Retail
Date and Size: 7/13/2009 19:51:47, 304128 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF

Description: Line In (High Definition Audio Device)
Default Sound Capture: No
Default Voice Capture: No
Driver Name: HdAudio.sys
Driver Version: 6.01.7600.16385 (English)
Driver Attributes: Final Retail
Date and Size: 7/13/2009 19:51:47, 304128 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF

Description: Aux (High Definition Audio Device)
Default Sound Capture: No
Default Voice Capture: No
Driver Name: HdAudio.sys
Driver Version: 6.01.7600.16385 (English)
Driver Attributes: Final Retail
Date and Size: 7/13/2009 19:51:47, 304128 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF

[codeman]

hello can my pc run psx emu?


if it was vista or xp i'd say "hell yeah, more than enough power" right off the bat since i'm running on a cheaper vista laptop with Intel Pentium dual-core processor @ 1.73 ghz, but i don't know anything about w7 other than my sisters laptops, those cheap ones that have no disk drives and is very small you get at wal-mart

[nyknix786]

just started emulating with psx. works great so far.

[emulaterman]

you know im doing that same thing now